TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 736 of 899

TM 9-2329-209-34-2-2

Dry cleaning

near an open

nearby when

WARNING

solvent is flammable. Do not use

flame.

Keep a fire extinguisher

solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

c.

Cleaning. Clean all parts with dry cleaning solvent.

d.

Inspection and Repair.

FRAME 1

1.

2.

3.

GO

Check that pulley assembly (1) and support block (2) have no cracks or

other damage.

Repair cracked parts by welding. Refer to TM 9-237. If

pulley assembly is damaged, get a new one.

Check that sleeve bearing (3) inside pulley (4) has no nicks, cracks or

burrs. Take off raised metal with a fine mill file. If more repair is needed,

get a new bearing.

Check that inside diameter of sleeve bearing (3) is not more than 1.520

inches. If inside diameter is more than limit given, get a new sleeve

bearing.

TO FRAME 2

17-718