TM-9-2320-209-34-2-2

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 3

MAY 1981

TM-9-2320-209-34-2-2 - Page 832 of 899

TM 9-2320-209-34-2-2

e.

Inspection and Repair.

FRAME 1

1. Check that pioneer tool kit bracket (1) has no bends, dents, cracks or broken welds.

Repair by straightening or welding.

Refer to TM 9-237. If more repair is needed,

get a new bracket.

2.

Check that cab shield upper half (2), lower half (3), and body (4) have no bends,

dents, cracks or broken welds.

Repair by straightening or welding. Refer to

TM 9-237. If more repair is needed, get new parts.

3.

Check that body hinges (5 and 6) and hinge pins (7) have no bends, dents or cracks.

Repair by welding or straightening.

Refer to TM 9-237. If more repair is needed,

get new parts.

4.

Clean straightened and welded areas with wire brush and emery cloth or sandpaper

and paint with proper paint. Refer to TM 43-0139.

GO

TO

FRAME

2

17-814

.