TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 324 of 592

TM 9-2320-209-34-2-3

19-9. LAMP SUPPORT BRACKET REMOVAL, REPAIR, AND REPLACEMENT

(LATE MODEL TRUCKS).

NOTE

This task is the same for the left and right lamp

support brackets. This task is shown for the right

lamp support bracket.

TOOLS:

No special tools required

SUPPLIES:

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

Clean rags

Tags

PERSONNEL: One

EQUIPMENT CONDITION:

Truck parked, engine off, handbrake set.

a.

Preliminary Procedures.

(1) Open hood.

Refer to TM 9-2320-209-10.

(2) Remove brush guard. Refer to para 19-5.

(3) Remove side panel.

Refer to Part 2, para 17-3.

(4) If working on left lamp support bracket, remove blackout drive light.

Refer to TM 9-2320-209-20.

19-31