TM-9-2320-209-34-2-3

2½-TON, 6X6, M44A1 AND M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; MAINTENANCE; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 3 OF 3

MAY 1981

TM-9-2320-209-34-2-3 - Page 536 of 592

TM 9-2320-209-34-2-3

FRAME 3

1.

2.

3.

4.

5.

6.

7.

8.

Find center of transmission gearshift lever hole (1).

Measure 3.25 inches from center of transmission

point A and mark as shown.

Measure 1.75 inches from point A to point B and

Measure 2.75 inches from point B to point C and

Measure 4.00 inches from center of transmission

point D and mark as shown.

Measure 3.25 inches from point D to point E and

Measure 2.50 inches from point E to point F and

Drill 0.218 inch diameter hole at points, B, C, E,

GO TO FRAME 4

gear shift lever hole (1) to

mark as shown.

mark as shown.

gearshift lever hole (1) to

mark as shown.

mark as shown.

and F.

21-201