TM-9-2320-260-10

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 1985

TM-9-2320-260-10 - Page 202 of 411

2-126

Change 4

TM 9-2320-260-10

(1)

Start engine (refer to paragraphs 2-12 and 2-13).

N O T E

If bumperettes are removed, secure cable as shown in TB article.

(2)

To prepare rear winch for travel, place winch cable chain (1) and hook (4) up through right

rear bumperette (3), across and down through left rear bumperette (2). Secure by placing hook (4)

around chain (1) between bumperettes.

(3)

Remove slack in winch cable chain (1) by moving winch shift lever (5) to WIND position.

(4)

Move engine clutch control lever (6) to ENGAGE position, then quickly to DISENGAGE

position.

(4.1)

Move throttle control lever (7.1) rearward to reduce engine speed.

(5)

Move engine clutch control lever (6) to DISENGAGE position.

(6)

Move winch shift lever (5) to NEUTRAL position.

i. Preparation for Travel.