TM-9-2320-260-10

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 1985

TM-9-2320-260-10 - Page 242 of 411

TM 9-2320-260-10

(2) Positioning the Crane Supports.

(a) Install outrigger base plates (4)

on rear outriggers (2) and secure with

retaining pin (1) and lockpin (3).

(b) Remove L-shaped pin (8), grasp outrigger base plate (4), and swing outrigger

(2) down to touch ground.

(c) Install L-shaped pin (8) in end frame (9).

(d) Use handle (7) to turn outrigger collar (6) left or right, as required, to rest base

plate (4) flat on ground; continue turning until pressure is felt when base plate (4) touches

ground. Repeat procedures for three remaining outriggers (2).

(e)

NOTE

Make sure outrigger (2) stands straight when resting against

ground.

Secure shipper braces in travel position (refer to step 6, i through m above).

2-166