TM-9-2320-260-10

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 1985

TM-9-2320-260-10 - Page 271 of 411

TM 9-2320-260-10

(4) Secure cable (5) from right rear winch (11) to lashdown loop (9). Slide rubber

protectors (10) into position on cable (5) to protect load and cable from damage.

(5) Move winch cable handle (3) up and down to take up slack in cable (5).

(6) Repeat steps 4 and 5 for left rear, forward, and side rear winches.

(7)

Secure cable (5) to lashing rings(12) and/or lashing hooks ( 14), and tighten

Repeat this step for opposite side hand winch.

(8) Remove handle (3) and stow in stowage compartment (13).

(9) Remove ladders (4) and stow in stowage compartment (15).

f. Preparation for Unloading.

NOTE

The two left side winches and the two rear winches have the same

operating procedures.

(1) Place ladders on left and right rear brackets (4).

. .

TA 094410

2-195