TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 1013 of 1337

TM 9-2320-260-20

13-16. REAR WINCH PROPELLER SHAFT MAINTENANCE

THIS TASK COVERS:

a. Removal

c. Installation

b. Cleaning and Inspection

INITIAL SETUP

APPLICABLE MODELS

EQUIPMENT CONDITION

M816

●

Parking brake set (TM 9-2320-260-10).

MATERIALS/PARTS

●

Rear winch driveshaft housing removed

(para. 13-23).

GAA grease (Appendix C, Item 16)

●

Wrecker rear winch cable rollers removed

REFERENCES (TM)

(para. 13-21).

TM 9-2320-260-10

TM 9-2320-260-20P

Remove propeller shaft (2) from yoke (4) and sleeve bearing (3) and route through three rear

crossmembers (1).

Inspect propeller shaft (2) for breaks, cracks, bends, and damaged splines. Replace propeller shaft (2)

if damaged.

Apply GAA grease to the splines of propeller shaft (2), route propeller shaft (2) through three rear

crossmembers (1) and sleeve bearing (3), and install into yoke (4).

13-40