TM-9-2320-260-20
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
APRIL 1995
TM-9-2320-260-20 - Page 1169 of 1337
TM 9-2320-260-20
Section II. DEEPWATER FORDING KIT MAINTENANCE
14-26. DEEPWATER FORDING KIT MAINTENANCE INDEX
PARA.
TITLE
PAGE
NO.
NO.
14-27.
Deepwater Fording Hand Control and Cable Replacement
14-52
14-28.
Deepwater Fording Pressurization Valve Replacement
14-54
14-29.
Deepwater Fording Pressure Relief Valve Replacement
14-56
14-30.
Deepwater Fording Snorkel Replacement
14-57
14-27. DEEPWATER FORDING HAND CONTROL AND CABLE REPLACEMENT
I
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-260-10
MATERIALS/PARTS
Locknut
Lockwasher
TM 9-2320-260-20P
EQUIPMENT CONDITION
•Parking brake set (TM 9-2320-260-10).
• Hood raised and secured (TM 9-2320-260-10).
a. Removal
1. Loosen two screws (6) and remove control cable (7) from valve nuts (5).
2. Remove locknut (9), screw (4), clamp (3), and control cable (7) from bracket (8). Discard locknut (9).
3. Remove grommet (2) from hole in firewall (1).
4. Remove nut (11) and pull hand control (13) and control cable (7) from nut (11), lockwasher (12), and
instrument panel (10). Discard lockwasher (12).
1. Insert control cable (7) through hole in instrument panel (10), new lockwasher (12), and nut (11).
2. Install hand control (13) on instrument panel (10) with new lockwasher (12) and nut (11).
3. Insert control cable (7) through hole in firewall (1).
4. Place grommet (2) over control cable (7) and install on firewall (1).
5. Insert control cable (7) through two valve nuts (5) and tighten screws (6).
6. Install control cable (7) on bracket (8) with clamp (3), screw (4), and new locknut (9).
14-52
Back to Top
