TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 679 of 1337

TM

9-2320-260-20

I

8-25. AIR COMPRESSOR GOVERNOR MAINTENANCE

THIS TASK COVERS

a. Removal

c. Check and Adjustment

b. Installation

-

INITIAL SETUP

APPLICABLE MODELS

EQUIPMENT CONDTION

All

ŽParking brake set (TM 9-2320-260-10).

MATERIALS/PARTS

ŽHood raised and secured (TM 9-2320-260-10).

Ž Air reservoir drained (TM 9-2320-260-10).

Two lockwashers

AntiSeize tape (Appendix C, Item 30)

GENERAL SAFETY INSTRUCTIONS

REFERENCES (TM)

Do not disconnect air lines before draining air

reservoirs.

TM 9-2320-260-10

TM 9-2320-260-20P

WARNING

Do not disconnect air lines before draining air reservoir. Small

parts under pressure may shoot out with high velocity, causing

injury to personnel.

1. Disconnect air line (6) from elbow (5).

2. Disconnect air lines (7) and (9) from tee (8).

3. Remove two screws (2), lockwashers (3), and governor (4) from firewall (1). Discard lockwashers (3).

4. Remove elbow (5) and tee (8) from governor (4).

1. Apply antiseize tape to male threads of elbow (5) and tee (8).

2. Install tee (8) and elbow (5) on governor (4).

3. Install governor (4) on firewall (1) with two new lockwashers (3) and screws (2).

4. Connect air lines (7) and (9) to tee (8).

5. Connect air line (6) to elbow (5).

8-54