TM-9-2320-260-20

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; UNIT MAINTENANCE

APRIL 1995

TM-9-2320-260-20 - Page 847 of 1337

12-5

TM 9-2320-260-20

THIS TASK COVERS:

a. Lower Splash Guard Removal

c. Upper Splash Guard Installation

b. Upper Splash Guard Removal

d. Lower Splash Guard Installation

INITIAL SETUP

APPLICABLE MODELS

REFERENCES (TM)

M813, M814

TM 9-2320-260-10

MATERIALS/PARTS

TM 9-2320-260-20P

Ten locknuts

EQUIPMENT CONDITION

Parking brake set (TM 9-2320-260-10).

I

a. Lower Splash Guard Removal

1.

Remove two locknuts (10), screws (11), and braces (6) from upper splash guard (13) and lower splash

guard (8). Discard locknuts (10).

2. Remove three locknuts (12), screws (7), retainer strip (9), and lower splash guard (8) from upper

splash guard (13). Discard locknuts (12).

I

b.

Upper Splash Guard Removal

1. Remove two locknuts (5), screws (4), and braces (6) from frame (3). Discard locknuts (5).

2.

Remove three locknuts (1), screws (14), and upper splash guard (13) from frame (2). Discard

locknuts (1).

1.

Install upper splash guard (13) on frame (2) with three screws (14) and new locknuts (l).

2.

Install two braces (6) on frame (3) with two screws (4) and new locknuts (5).

1. Install lower splash guard (8) on upper splash guard (13) with retainer strip (9), three screws (7),

and new locknuts (12).

2.

Install two braces (6) on upper splash guard (13) and lower splash guard (8) with two screws (11)

and new locknuts (10).

12-10