TM-9-2320-260-24P-1
TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE; REPAIR PARTS AND SPECIAL TOOLS LIST; VOLUME 1 OF 2
SEPTEMBER 2003
TM-9-2320-260-24P-1 - Page 21 of 692
0001 00-5
TM 9-2320-260-24P-1
0001 00
STOCK NUMBER Column.
This column lists the NSN for the associated part number and manufacturer
identified in the PART NUMBER and CAGEC columns to the left
FIG. Column.
This column lists the number of the figure where the item is identified/located in the repair
parts list and special tool list work packages.
ITEM Column.
The item number is that number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
SPECIAL INFORMATION
USABLE ON CODE.
The usable on code appears in the lower left corner of the Description column
heading. Usable on codes are shown as “UOC:.
......
”
in
the Description Column (justified left) on the
first line applicable item description/nomenclature. Uncoded items are applicable to all models.
Identification of the usable on codes used in the RPSTL are:
Code
Used On
Code
Used On
614
M815 W/W
629
M814 WO/W
620
M821 W/W
630
M820 WO/W
621
M812A1 W/W
631
M820A1 WO/W
622
M816 W/W
632
M820A2 WO/W
623
M810 W/W
633
M817 W/W
624
M810 WO/W
634
M818 W/W
625
M813 W/W
635
M818 WO/W
626
M813 WO/W
637
M813A1 W/W
627
M817 WO/W
638
M813A1 WO/W
628
M814 W/W
Fabrication Instructions.
Bulk materials required to manufacture items are listed in the Bulk Material
Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the description
column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions
for items source code to be manufactured or fabricated are found in TM 9-2320-387-24.
Assembly Instruction.
Detailed assembly instructions for items source coded to be assembled from
component spare/repair parts are found in TM 9-2320-387-24. Items that make up the assembly are listed
immediately following the assembly item entry or reference is made to an applicable figure.
Kits.
Line item entries for repair parts kits appear in group 9401 KITS in the repair parts list work
packages.
Index Numbers.
Items which have the word BULK in the figure column will have an index number
shown in the item number column. This index number is a cross-reference between the National Stock
Number/Part Number Index and the bulk material list in the repair parts list work packages.
Associated Publications.
The publications listed below pertain to the 5-Ton, 6x6, M809 series vehicles
and their components:
LO 9-2320-260-12
Lubrication Order
TM 9-2320-260-10
Operator’s Manual
TM 9-2320-260-10HR
Hand Receipt, Operators Manual
TM 9-2320-260-20
Unit Maintenance Manual
TM 9-2320-260-34
Direct Support and General Support Maintenance Manual
DMWR 9-3820-501
Deport Maintenance Work Requirements,Front and Rear Winch
Assemblies
DMWR 9-2520-508
Depot Maintenance Work Requirements, Front and Rear Axle Assemblies
Illustrations.
Item numbers on illustrations have been assigned in clockwise sequence, starting at
the 11 o’clock position (upper left).
Back to Top
