TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 225 of 657

TM 9-2320-260-34-1

3-52. OIL PUMP REPAIR (Contd)

7. Press idler shaft (9) into gear pocket side of oil pump body (2) until idler shaft (9) extends

2.600-2.620 in. (66.04-66.55 mm) above back of oil pump body (2).

8. Press gear (7) on drilled end of driveshaft (8) until driveshaft (8) extends 0.040-0.060 in.

(1.02-1.52 mm) above gear (7).

9. Lubricate driveshaft (8) with oil and insert driveshaft (8) into oil pump body (2).

10. Place 0.012 in. (0.30 mm) feeler gage between gear (7) and oil pump body (2).

11. Press gear (7) against feeler gage, then remove feeler gage.

3-173