TM-9-2320-260-34-1

TRUCK, 5-TON, 6X6, M809 SERIES (DIESEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME 1 OF 2

JULY 1994

TM-9-2320-260-34-1 - Page 426 of 657

TM 9-2320-260-34-1

7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)

34.

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

Disconnect wires (2) and (3) from horn solenoid (1).

Bend open two clips (4) and remove front wiring harness (11).

Remove three screws (6), clips (7), and wires (8), (9), and (10) from relay (31).

Remove screw (25), lockwashers (26) and (28), and ground wire (27) from protective control box (32)

and bracket (5). Discard lockwashers (28) and (26).

Disconnect front wiring harness (11) from protective control box (32).

Remove screw (24), ground wire (23), and Iockwasher (29) from turn signal flasher (30) and

bracket (5). Discard lockwasher (29).

Disconnect front wiring harness (11) from turn signal flasher (30).

Disconnect wires (17), (18), (19), and (20) from two circuit breakers (16).

NOTE

Perform step 42 for M816 and M819 vehicles.

Assistant will help with step 42.

Disconnect wire (34) from wire assembly (33).

Remove two locknuts (12), washers (14), screws (22), and grommet (13) from firewall (15). Discard

locknuts (12).

Bend open clip (21) and remove front wiring harness (11).

7-8