TM-9-2320-272-10
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2004
CHANGE 2
TM-9-2320-272-10 - Page 22 of 481
TM 9-2320-272-10
Change 2
1-5
a. Vehicle Maintenance Forms and Records.
Department of the Army forms
and procedures used for equipment maintenance will be those prescribed by DA
Pam 738-750 as contained in the maintenance management update.
b. Hand Receipt Manual
This manual has a companion document with a TM
number followed by -HR (which stands for Hand Receipt). The TM 9-2320-272-10-
HR consists of preprinted hand receipts (DA Form 2062) that list end item related
equipment (i.e., COEI, BII, and AAL) you must account for. As an aid to property
accountability, additional -HR manuals may be requisitioned from the following
source in accordance with procedures in chapter 3, AR 310-2:
The U.S. Army Adjutant General Publications Center
2800 Eastern Blvd.
Baltimore, MD 21220
Corrosion Preventive and Control (CPC) of Army materiel is a continuing concern. It is
important that any corrosion problems with this item be reported so that the problems can
be corrected and improvements can be made to prevent problems in the future items.
While corrosion is typically associated with rusting of metals, it can also include
deterioration of other materials, such as rubber and plastic. Unusual cracking, softening,
swelling, or breaking of these materials may be a corrosion problem.
If a corrosion problem is identified, it can be reported using Standard Form 368, Product
Quality Deficiency Report. Use of key words such as “corrosion”, “rust”, “deterioration”, or
“cracking” will ensure that the information is identified as a CPC problem.
The form should be submitted to the address specified in DA Pam 738-750.
Procedures for destruction of Army materiel to prevent enemy use can be found in
TM 750-244-6.
If your vehicle needs improvement, let us know. Send us an EIR. You, the user, are the
only one who can tell us what you don’t like about your equipment. Let us know why
you don’t like the design or performance. The preferred method for submitting QDRs is
through the Army Electronic Product Support (AEPS) website under the Electronic
Deficiency Reporting System (EDRS). The web address is: https://aeps.ria.army.mil.
This is a secured site requiring a password which can be applied for on the front page
of the website. If the above method is not available to you, put it on an SF 368, Product
Quality Deficiency Report (PQDR), and mail it to us at: U.S. Army Tank-automotive
and Armaments Command, ATTN: AMSTA-TR-E/PQDR MS 267, 6501 E. 11 Mile
Road, Warren, MI 48397-5000. We’ll send you a reply.
1-5. REPORTING EQUIPMENT IMPROVEMENT
RECOMMENDATIONS (EIR’S)
1-4. DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE
1-3. CORROSION PREVENTION AND CONTROL (CPC)
1-2. MAINTENANCE FORMS
Back to Top
