TM-9-2320-272-10

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2004

CHANGE 2

TM-9-2320-272-10 - Page 332 of 481

TM 9-2320-272-10

2-223

a.

General.

Troop seat kit is used to convert M929/A1/A2 and M930/A1/A2

dump trucks into troop carriers. Troop seat kit also enables dump trucks to trans-

port bulk cargo that would otherwise extend above dump body.

b.

Troop Seat Kit Installation.

(1)

Insert side racks (4) into slots (5) on side walls (10).

(2)

Fold out troop seat support legs (9). Lay troop seat (8) flat on floor (11) of

vehicle.

(3)

Raise troop seat (8) level with slots (6) on dump body side walls (10).

Insert troop seat engaging hooks (7) into

slots (6), fold support legs (9) inward, and

lower troop seat (8) into position.

(4)

Adjust each troop seat support

leg (9) until all supports evenly contact side

walls (10) and floor (11) of the vehicle.

(5)

Secure safety strap (13) to eye-

lets (12).

CAUTION

Troop seat kit for dump trucks must be

removed and stowed off vehicle when

dump truck is used for dumping opera-

tions. Failure to do this will result in

damage to troop seat kit.

2-41. TROOP SEAT KIT