FIELD MAINTENANCE
VEHICLE PULLS RIGHT OR LEFT WHEN APPLYING BRAKES
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(Volume 5, WP
0826, Table 1, Item 56)
Gauge, Pressure
(Volume 5, WP
0826, Table 1, Item 19)
Test Set, Electronic Systems
(Volume 5, WP
0826, Table 1, Item 51)
Personnel Required
(2)
References
Point to Point Schematics
References (cont.)
WP
0053
WP
0120
Volume 3, WP
0424
Volume 3, WP
0426
Volume 3, WP
0432
Volume 3, WP
0434
Volume 3, WP
0479
Volume 3, WP
0481
Equipment Condition
Vehicle parked and engine shut down.
(TM
9-2320-272-10)
TROUBLESHOOTING PROCEDURE
VEHICLE PULLS RIGHT OR LEFT WHEN APPLYING BRAKES
NOTE
•
Conduct these malfunction tests if vehicle pulls right or left when applying brakes. This
procedure will check for front service brakes grabbing, front service brake chambers for
proper air pressure, brakeshoe lining for wear, oil on brakeshoe lining or drum, actuator
seals for rotted, torn or worn conditions and proper clearance between brakeshoe lining
and drum.
•
Vehicle pulling to right or left indicates malfunction in one of the two front wheel service
brakes.
TM 9-2320-272-23-1
0121
0121-1