TM-9-2320-272-23-2

WARNING SUMMARY - Continued

HAZARDOUS MATERIALS DESCRIPTIONS

- Continued

WARNING

SOLVENT CLEANING COMPOUND

Solvent cleaning compound MIL-PRF-680 type II and III may be irritating to the eyes

and skin. Use protective gloves and goggles. Use in well ventilated areas. Use

respirator as needed.

Accidental ingestion can cause irritation of digestive tract and repository tract, and

may cause lung and central nervous system damage. Can be fatal if swallowed. First

aid for ingestion: do not induce vomiting. Seek immediate medical attention.

First aid for skin contact: remove contaminated clothing, Wash skin thoroughly with

soap and water. If symptoms persist, seek medical attention.

First aid for eye contact: flush with water for 15 minutes or until irritation subsides. If

symptoms persist, seek medical attention.

Inhalation of high/massive concentrations can cause coma or be fatal. First aid for

inhalation: move to fresh air. If not breathing, provide artificial respiration. If symptoms

persist, seek medical attention.

Keep away from open flames and other sources of ignition. Failure to comply may

result in injury or death to personnel. The flash point for type II solvent cleaning

compound is 141°F to 198°F (61°C to 92°C) and type III is 200°F to 241°F (93°C to

116°C). Fire extinguishers should be placed nearby when using solvent cleaning

compound.

Improper cleaning methods and use of unauthorized cleaning solvents may injure

personnel and damage equipment.

Cloths or rags saturated with solvent cleaning compound must be disposed of using

authorized facilities procedures.

Eye shields must be worn when cleaning with a wire brush. Flying rust and metal

particles may cause injury.

TM 9-2320-272-23-2

TM-9-2320-272-23-2 - Page 8 of 1417