TM-9-2320-272-23-2
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 2 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-2 - Page 963 of 1417
INSTALLATION
1.
Install S-hook (Figure 2, Item 23), chain (Figure 2, Item 24), and cap (Figure 2, Item 25) on surge tank
(Figure
2, Item 1).
2.
Install bracket (Figure 2, Item 8) on bracket (Figure 2, Item 20) with screw (Figure 2, Item 21) and nut
(Figure
2, Item 9). Do not tighten nut.
3.
Install brackets (Figure 2, Items 8 and 20) on engine (Figure 2, Item 15) with two screws (Figure 2, Item 19)
and screw (Figure 2, Item 10).
4.
Position two seats (Figure 2, Item 22) on bracket (Figure 2, Item 20).
5.
Position two clamps (Figure 2, Item 3) on surge tank (Figure 2, Item 1) and install clamps and surge tank on
bracket (Figure 2, Item 20) with two screws (Figure 2, Item 2), nuts (Figure
2, Item 7), washers
(Figure
2,
Item
5), and locknuts (Figure 2, Item 6).
6.
Connect hose (Figure 2, Item 14) on surge tank (Figure 2, Item 1) and tighten clamp (Figure 2, Item 16).
7.
Connect hose (Figure 2, Item 17) to surge tank (Figure 2, Item 1) and tighten clamp (Figure 2, Item 18).
NOTE
Male pipe threads must be wrapped with antiseize tape before installation.
8.
Install fitting (Figure 2, Item 4) on surge tank (Figure 2, Item 1).
9.
Connect hose (Figure 2, Item 13) to fitting (Figure 2, Item 4) and tighten clamp (Figure 2, Item 12).
10.
Connect hose (Figure 2, Item 11) to surge tank (Figure 2, Item 1).
TM 9-2320-272-23-2
0279
0279-4
Back to Top
