TM-9-2320-272-23-3
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 3 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-3 - Page 1279 of 1469
REMOVAL
1.
Remove six screws (Figure 1, Item 16), three clamps (Figure 1, Item 15), and swing davit (Figure 1, Item 5)
from van body (Figure 1, Item 6) and base (Figure 1, Item 7).
2.
Remove two cotter pins (Figure 1, Item 18) and davit pin (Figure 1, Item 17) from swing davit
(Figure 1, Item 5). Discard cotter pins.
3.
Remove locknut (Figure 1, Item 4), washer (Figure 1, Item 3), screw (Figure 1, Item 19), two spacers
(Figure 1, Item 1), and davit pulley (Figure 1, Item 2) from swing davit (Figure 1, Item 5). Discard locknut.
4.
Remove three screws (Figure 1, Item 14) and base (Figure 1, Item 7) from van body (Figure 1, Item 6).
5.
Remove cotter pin (Figure 1, Item 11), shaft (Figure 1, Item 10), spacer (Figure 1, Item 12), and pulley
(Figure 1, Item 13) from pulley bracket (Figure 1, Item 8). Discard cotter pin.
6.
Remove four screws (Figure 1, Item 9) and pulley bracket (Figure 1, Item 8) from van body (Figure 1, Item 6).
TM 9-2320-272-23-3
0520
0520-2
Back to Top
