TM-9-2320-272-23-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-4 - Page 1249 of 1393

REMOVAL

NOTE

Assistant will help when required.

1.

Remove two screws (Figure 1, Item 1) and lockwashers (Figure 1, Item 16) from roof assembly

(Figure 1, Item 2). Discard lockwashers.

NOTE

Note position of hook bolts for installation.

2.

Remove four nuts (Figure 1, Item 3) and hook bolts (Figure 1, Item 15) from top of roof assembly

(Figure 1, Item 2) and windshield frame (Figure 1, Item 14).

3.

Remove 16 locknuts (Figure 1, Item 4), washers (Figure 1, Item 5), screws (Figure 1, Item 8), and washers

(Figure 1, Item 5) from roof assembly (Figure 1, Item 2). Discard locknuts.

4.

Remove roof assembly (Figure 1, Item 2) and rubber seal (Figure 1, Item 6) from back panel assembly

(Figure 1, Item 7) and windshield frame (Figure 1, Item 14). Discard rubber seal.

5.

Remove 16 locknuts (Figure 1, Item 10), screws (Figure 1, Item 9), washers (Figure 1, Item 13), back panel

assembly (Figure 1, Item 7), and rubber seal (Figure 1, Item 12) from cab body (Figure 1, Item 11). Discard

locknuts and rubber seals.

TM 9-2320-272-23-4

0750

0750-2