INSTALLATION
1.
Install exhaust tube (Figure 2, Item 7) and elbow (Figure 2, Item 1) on splash panel (Figure 2, Item 8) with two
clamps (Figure 2, Item 5), screws (Figure 2, Item 9), and locknuts (Figure 2, Item 6).
2.
Install exhaust elbow (Figure 2, Item 1) on fuel burning heater (Figure 2, Item 2) with cotter pin
(Figure
2,
Item
3).
3.
Install exhaust elbow (Figure 2, Item 1) on exhaust tube (Figure 2, Item 7) with cotter pin (Figure 2, Item 4).
TM 9-2320-272-23-4
0765
0765-4