TM-9-2320-272-23-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 4 OF 5

SEPTEMBER 2012

TM-9-2320-272-23-4 - Page 975 of 1393

REMOVAL

NOTE

•

The oil filter is located on the right frame rail above the wet tank air reservoir.

•

Have drainage container ready to catch oil.

•

Use drain pans to retain leaking/draining fluids. Refer to local procedures and plans for

preventing and responding to fluid spills or leaks. Comply with local regulations when

disposing of clean up material and leaked and spilled fluids.

1.

Loosen center bolt (Figure 1, Item 6) and remove filter housing (Figure 1, Item 7), spring (Figure 1, Item 3),

and gasket (Figure 1, Item 2) from filter base (Figure 1, Item 1). Discard gasket.

2.

Remove center bolt (Figure 1, Item 6), washer (Figure 1, Item 5), and oil filter (Figure 1, Item 4) from filter

housing (Figure 1, Item 7). Discard oil filter.

TM 9-2320-272-23-4

0704

0704-2