TM-9-2320-272-23-5
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-5 - Page 209 of 623
DRIVER'S SEATBELT INSTALLATION
1.
Position seatbelt buckle (Figure 2, Item 26) between seat backseat support (Figure 2, Item 25) and driver's
seat (Figure 2, Item 27).
2.
Install tether assembly (Figure 2, Item 21), washer (Figure 2, Item 23), seatbelt buckle (Figure 2, Item 26),
washer (Figure 2, Item 28), and screw (Figure 2, Item 29) on seat rod (Figure 2, Item 24).
3.
Install sleeve (Figure 2, Item 17), washer (Figure 2, Item 18), tether assembly (Figure 2, Item 21), washer
(Figure 2, Item 20), screw (Figure 2, Item 19), bracket (Figure 2, Item 16), washer (Figure 2, Item 15), and nut
(Figure 2, Item 14) on left diagonal channel (Figure 2, Item 22). Tighten nut 20 to 25 lb-ft (27 to 34 N·m).
4.
Install spacer (Figure 2, Item 2), tether assembly (Figure 2, Item 3), washer (Figure 2, Item 4), retractor
(Figure
2,
Item
5), washer (Figure 2, Item 6), and screw (Figure 2, Item 7) on seat rod (Figure 2, Item 1).
5.
Install washer (Figure 2, Item 11), tether assembly (Figure 2, Item 3), washer (Figure 2, Item 12), screw
(Figure
2,
Item
13), washer (Figure 2, Item 9), and nut (Figure 2, Item 8) on vertical channel
(Figure
2,
Item
10). Tighten nut 40 to 45 lb-ft (54 to 61 N·m).
TM 9-2320-272-23-5
0790
0790-4
Back to Top
