ASSEMBLY - Continued
2.
Install bearing assembly (Figure 14, Item 3) on support assembly (Figure 14, Item 8) with 12 washers
(Figure
14,
Item
5), screws (Figure 14, Item 4), washers (Figure 14, Item 6), and locknuts
(Figure
14,
Item
7).
3.
Install three lockrings (Figure 14, Item 2) to inner ring of support assembly (Figure 14, Item 1) with 18 washers
(Figure 14, Item 9) and screws (Figure 14, Item 10).
TM 9-2320-272-23-5
0775
0775-22