TM-9-2320-272-24-1

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 1 OF 4

JUNE 1998

TM-9-2320-272-24-1 - Page 610 of 1015

3-84. INDICATOR

TM 9-2320-272-24-1

THIS TASK COVERS:

a. Light Assembly Removal

c. Lamp Removal

b. Light Assembly Installation

d. Lamp Installation

INITIAL SETUP:

APPLICABLE MODELS

REFERENCES (TM)

All

TM 9-2320-272-10

TOOLS

TM 9-2320-272-24P

General mechanic’s tool kit (Appendix E, Item 1)

EQUIPMENT CONDITION

MATERIALS/PARTS

Parking brake set (TM 9-2326-272-10).

Two lockwashers (Appendix D. Item 351)

Battery ground cables disconnected (para. 3-126).

1.

Remove four screws (7) from warning light panel (1) and pull warning light panel (1) away from

instrument panel (2).

2.

Remove lamp lens (10) from lamp holder (5).

3.

Remove two screws (9) and lockwashers (8) from warning light panel assembly (1) and lamp holder

bracket (6). Discard lockwashers (8).

NOTE

Tag wire for installation.

4.

Disconnect wire (3) from lamp holder connector (4).

5.

Remove lamp holder (5) and bracket (6) from warning light panel assembly (1).

1.

Install lamp holder (5) and bracket (6) on warning light panel assembly (1) with two new

lockwashers (8) and screws (9).

2.

Connect wire (3) to lamp holder connector (4).

3.

Install lamp lens (10) on lamp holder (5).

4.

Install warning light panel (1) on instrument panel (2) with four screws (7).

NOTE

All panel light lamps are removed and installed the same.

1.

Remove lamp lens (10) from lamp holder (5).

2.

Push lamp (11) inward and turn counterclockwise to remove.

1.

Push lamp (11) inward and turn clockwise to install.

2.

Install lamp lens (10) on lamp holder (5).

3-246