TM-9-2320-272-24-1

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 1 OF 4

JUNE 1998

TM-9-2320-272-24-1 - Page 677 of 1015

TM 9-2320-272-24-1

3-118. FRONT AND REAR COMPOSITE LIGHT AND BRACKET REPLACEMENT (Contd)

e. Removal (M936/A1/A2)

NOTE

Left and right composite lights and brackets are replaced the same

way.

1.

Remove two locknuts (14), screws (16), and reflector (15) from taillight guard (11). Discard

locknuts (14).

2.

Remove four screws (13), lockwashers (12), and taillight guard (11) from bracket (20). Discard

lockwasher (12).

NOTE

Tag wires for installation.

3.

Disconnect four connectors (17) from wires (18).

4.

Remove two screw-assembled lockwashers (10) and rear composite light (19) from bracket (20).

Discard screw-assembled lockwashers (10).

5.

Remove two locknuts (9), screws (8), and bracket (20) from ladder bracket (7). Discard locknuts (9).

f. Installation (M936/A1/A2)

1.

Install bracket (20) on ladder bracket (7) with two screws (8) and new locknuts (9).

2.

Install rear composite light (19) on bracket (20) with two new screw-assembled lockwashers (10).

3.

Connect four connectors (17) to wires (18).

4.

Install taillight guard (11) on bracket (20) with four new lockwashers (12) and screws (13).

5.

Install reflector (15) on taillight guard (12) with two screws (16) and new locknuts (14).

3-313