TM-9-2320-272-24-4

TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL; VOLUME 4 OF 4

JUNE 1998

TM-9-2320-272-24-4 - Page 576 of 836

5-90. VAN

TM 9-2320-272-24-4

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP:

APPLICABLE MODEL

M934/A1/A2

REFERENCES (TM)

TM 9-2320-272-24P

TOOLS

TM 9-2320-272-24P

General mechanic’s tool kit (Appendix E, Item 1)

EQUIPMENT CONDITION

l

Parking brake set (TM 9-2320-272-10)

l

Battery ground cables disconnected (para. 3-126).

l

Ceiling filler and side panels removed (para. 5-79).

NOTE

Tag cables for installation.

1.

Remove twelve screws (4) and clamps (5) from wiring harness (6) and van ceiling (1).

2.

Disconnect plug (2) from air conditioner (3).

3.

Remove six screws (22) and cover (21) from load center (16).

4.

Remove screw (7) and clamp (8) from wiring harnesses (20) and (23) and plate (12).

5.

Remove nut (9), screw (15), two washers (10), cable assembly (14), ground cable (13), and wiring

harness cable (11) from load center (16).

6.

Remove three screws (19) and wiring harness cables (18) from 30 amp circuit breaker (17).

7.

Remove wiring harness (20) from load center (16).

1.

Position wiring harness (20) on load center (16).

2.

Install three wiring harness cables (18) on 30 amp circuit breaker (17) with three screws (19).

3.

Install wiring harness cable (11), ground cable (13), and cable assembly (14) on load center (16) with

screw (15), two washers (10), and nut (9).

4.

Install clamp (8) on wiring harnesses (23) and (20) and plate (12) with screw (7).

5.

Install cover (21) on load center (16) with six screws (22).

6.

Connect plug (2) to air conditioner (3).

7.

Install twelve clamps (5) on wiring harness (6) and van ceiling (1) with twelve screws (4).

5-570