TM-9-2320-273-10

LOCATION AND DESCRIPTION OF MAJOR COMPONENTS - CONTINUED

M920

ENGINE - Cummins NTC-400 diesel engine used to power vehicle.

CLEARANCE MARKER LIGHTS - There are ﬁve amber lights mounted on the cab

top used to mark the vehicle cab. The lights are controlled by the headlamp switch.

AIR HORN - A single horn is mounted on the cab top on the driver side and is air

operated.

SIDE VIEW MIRRORS - There is an adjustable side view mirror mounted on each cab

door used to view the area to the left and right of the vehicle and trailer when coupled.

NATO SLAVE RECEPTACLE - The NATO slave receptacle is located on both sides

of the cab, allowing vehicle to be jump started using another vehicle when the batteries

are low.

FUEL TANK - The fuel tank is located on the left frame rail below the cab driver

door. The fuel tank supports the driver steps for entering the cab, which are welded to

the side of the tank.

TURN SIGNAL LIGHTS - There is a turn signal light mounted on top of each front

fender. The turn signal light has an amber lens facing the front of the vehicle and a red

lens facing the rear. This light also functions as a marker light.

BLACKOUT MARKER LIGHT - There is a light mounted above the service headlight

on each front fender for blackout lighting only.

BLACKOUT DRIVE LIGHT - A single light is mounted adjacent to the headlight on

the left front fender for blackout lighting only.

TOWING EYES AND SHACKLES - There are two towing eyes with removable

shackles mounted on the front bumper and frame front support brackets.

BRUSH GUARD - There is a steel brush guard mounted on the front of the vehicle

designed to protect the grille/headlight area.

SERVICE HEADLIGHTS - There is a combination high/low sealed beam headlight

mounted on each front fender for service lighting as required.

TM 9-2320-273-10

0002

0002-24

TM-9-2320-273-10 - Page 58 of 452