TM-9-2320-273-10
TRUCK, TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; OPERATOR’S MANUAL
DECEMBER 2012
TM-9-2320-273-10 - Page 95 of 452
CREW PROTECTION KIT FUNCTION - CONTINUED
The roof armor consists of two panels that are supported by door frames, rear armor,
and a center support. The windshield and side windows are constructed of ballistic
glass. The remaining armor panels are fastened to the vehicle using attachment brackets
and Grade 8 attachment hardware.
AIR CONDITIONING KIT FUNCTION
Air Conditioning Kit is installed on an armored vehicle to control the temperature
inside the cab. A belt-driven compressor is installed on the engine, a condenser is
installed on the cab roof, an evaporator assembly is installed on the interior of the cab,
and a receiver/dryer is installed on the outside of the cab. Refrigerant is transferred to
each of these components through O-ring sealed hoses. Electrical power is tied into the
existing electrical system on the vehicle. The entire system is controlled by an A/C
ON/OFF switch and fan speed LOW/MEDIUM/HI switch inside the cab.
END OF WORK PACKAGE
TM 9-2320-273-10
0004
0004-7/8 blank
Back to Top
