TM-9-2320-273-20

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE

NOVEMBER 1980

TM-9-2320-273-20 - Page 1310 of 1500

TM 9-2320-273-20

BODY AND CAB.

11-15. VENTILATOR MAINTENANCE (Continued).

LOCATION/lTEM

ACTION

REMARKS

A. REMOVAL (Continued).

3. Four screws (6)

Unscrew and remove.

4. Ventilator (5).

Remove.

5. Seal (4).

a. Inspect seal for deterioration.

If necessary, remove using a

suitable tool.

b. If seal is being replaced, cut

seal to desired length and

remove adhesive backing.

Install seal on ventilator

applying firm and even

pressure.

B. INSTALLATION.

6. Ventilator (5).

7. Four screws (6).

8. Two wire ends (7).

9. Two clips (1).

Set in place.

Screw in and tighten.

Slide onto two pins (3).

Fasten over cable wires (2).

NOTE

Follow-on maintenance action required:

Install heater; refer to paragraph 11-24B.

11-46