TM-9-2320-273-20

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE

NOVEMBER 1980

TM-9-2320-273-20 - Page 1360 of 1500

TM 9-2320-273-20

BODY AND CAB.

11-29. HEATER CONTROL VALVE MAINTENANCE (Continued).

LOCATION/lTEM

ACTION

REMARKS

A. REMOVAL (Continued).

2. Screw (2).

3. Cable end (4).

4. Two clamps (9).

5. Control valve (8).

B .

INSTALLATION.

Loosen. Remove cable (1) from

clip (3).

Slide off of pin (5).

NOTE

Before removing control valve (8), place

clean container underneath to catch

spilled coolant.

Loosen.

Remove from two rubber

connectors (6).

6. Control valve (8).

7. Two clamps (9).

8. Cable (1).

9. Cable end (4).

Push into two rubber connectors

(6).

Tighten.

Place in clip (3) and tighten screw

(2).

Slide onto pin (5).

NOTE

Follow-on maintenance action required:

Bleed heater and adjust shutoff valve;

refer to paragraph 4-50C.

11-96