TM-9-2320-273-20

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE

NOVEMBER 1980

TM-9-2320-273-20 - Page 274 of 1500

TM 9-2320-273-20

FUEL AND AIR INTAKE SYSTEM.

4-25. AIR CLEANER ASSEMBLY MAINTENANCE (Continued).

LOCATION/lTEM

ACTION

REMARKS

C. INSTALLATION OF BRACKETS AND FITTINGS (IF REMOVED).

9.

10.

11.

Nipple filter (2).

Install with elbow (5) attached.

Two brackets (14).

Spread and position on air

filter assembly (1).

Two capscrews (12) and two

Install finger tight.

nuts and Iockwashers (13).

D. INSTALLATION OF FILTER ASSEMBLY.

12.

13.

14.

15.

Filter assembly (1).

Place on three studs (8), and

bolt (9), install four lock-

washers (10) and nuts (11).

Air intake pipe (15).

Slide boot (16) over air intake

pipe (15) position and tighten

two clamps (17).

Restriction indicator

Connect flare nut (4) to elbow

tube (3).

(5) and tighten.

Turbo air inlet pipe (7).

Install over filter discharge.

Position and tighten clamps (6).

If brackets are removed it

may be necessary to reposi-

tion them to fit over studs.

Tighten nuts at this time.

4-82