TM-9-2320-273-20

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE

NOVEMBER 1980

TM-9-2320-273-20 - Page 598 of 1500

TM 9-2320-273-20

EXTERIOR LIGHTING.

5-51. STATIONARY WORK LAMP BULB REPLACEMENT (Continued).

LOCATION/lTEM

ACTION

REMARKS

NOTE

Prior to the removal of the bulb make cer-

tain that the work lamp switch is in the

OFF position.

1.

2.

3.

4.

Machine screw (2) and hex

nut (3).

Retainer ring (1).

Two screws (4).

Bulb (5).

Remove.

Remove.

Loosen and remove wires

(6).

Remove.

B.

INSTALLATION.

5.

6.

7.

8.

Bulb (5).

Two screws (4).

Retainer ring (1).

Machine screw (2) and hex

nut.(3).

C. OPERATIONAL CHECK.

9. Work lamp switch.

Hold in position and

install wires (6).

Tighten.

Install.

Install and tighten.

Place switch in ON

position.

Check to see that lamp is lit.

5-174