TM-9-2320-273-20

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE

NOVEMBER 1980

TM-9-2320-273-20 - Page 934 of 1500

TM 9-2320-273-20

BRAKE SYSTEM.

9-10. AIR DRYER DEHYDRATE CARTRIDGE REPLACEMENT (Continued).

LOCATION/lTEM

ACTION

REMARKS

C. INSTALLATION.

6. Air dryer housing (1).

a. Lubricate O-ring (2) with

Torque to 32 Ib-ft.

silicone grease.

b. Using 3/4 inch socket wrench

screw in and tighten new

dehydrate cartridge (3).

7.

Lubricate O-ring (4) with sili-

cone grease and install in

groove.

NOTE

Assistant may be required for this step.

8.

a. Join alinement marks and

press end cover assembly (5)

up as far as it will go.

b. Secure with retaining ring (9).

9. Three retaining clips (11).

Turn outward and over the edge

of air dryer housing (1) and

tighten three screws (10).

10. Electrical terminal (14).

Install electrical wire (7), nut

(13) and insulating boot (8).

11. End cover assembly (5).

Apply antiseizing tape and

connect hose assembly (6) to

connector (12).

NOTE

Follow-on maintenance action required:

Pressurize air system and check for leaks

and proper operation.

9-28.2 Change 2