TM-9-2320-279-10-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

OPERATOR’S MANUAL VOLUME 2 OF 2

DECEMBER 1998
CHANGE 3

  TM-9-2320-279-10-2 - Page 131 of 819

TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
2-64. M984E1 CRANE OPERATION (REMOTE CONTROLS).
a. Set Up REMOTE CONTROL UNIT.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
WARNING
Operate crane from left or right remote control
station if operator will not be able to see load at all
times during crane operation. Boom and load moving
out of control could cause serious injury or death.
Excessive noise levels are present any time the
heavy-duty winch or crane is operating. Wear single
hearing protection (earplugs or equivalent) while
working around equipment while it is running.
Failure to do so could result in damage to your
hearing. Seek medical aid should you suspect a
hearing problem.
Prepare crane for use (para 2-63a).
Set up outriggers (para 2-63b).
Raise boom and mast to operating position (para 2-63c).
Remove REMOTE CONTROL UNIT (1) and cable (2) from stowage
box (3).
Remove covers (4) from cable (2) and cover (5) from REMOTE
CONTROL UNIT receptacle (6). Clean any dirt or water from
receptacle.
Clean any dirt or water from cable connector (7).
Connect cable connector (7) to REMOTE CONTROL UNIT
receptacle (6).
2-95


Back to Top