TM 9-2320-279-10-2
(39)
(40)
(41)
M984E1 General Operation Procedures (Cont)
Set POWER switch (42) to ON position.
Set HIGH IDLE switch (43) to CONTINUOUS.
Push and release LATCH switch (44). Engine speed will
approximately 1500 rpm.
increase
WARNING
Keep out from under retrieval system and disabled
vehicle when raised off ground or personal injury or
death may result.
CAUTION
•
Fully retract both tow cylinders before lifting
disabled vehicle or equipment damage may result
Ž Safety chains must not hit rear brake chambers or
composite taillights or equipment damage may result,
to
Ž Make sure all rigging is secure. Loose rigging can
become entangled and cause damage to equipment.
(42)
Push in LIFT CYLINDER control lever to retract lift cylinder (30) and
raise disabled vehicle approximately 1.5 ft (45 cm) off ground.
2-481