TM 9-2320-279-10-2
M98E1 General Operating Procedures (Cont)
2-83. TOW M966 (CONT).
(27)
(28)
(29)
(30)
(31)
Release PARKING BRAKE on disabled vehicle (refer to M966 operator’s
manual. )
Alternately push in TOW and LIFT CYLINDER control levers until
tow cylinders (2) are fully retracted.
Push in LIFT CYLINDER control lever to retract lift cylinder (27) until
slack is removed from safety chains (23).
NOTE
Safety chains can be routed to towing shackles or
safety chain hoop. Towing shackles can be used only
after tow cylinders are extended.
Adjust chain slack so safety chains just touch the
ground.
Route two safety chains (23) through safety chain hoop (28) on wrecker
and secure grab hooks (29) with safety shackles (30).
Wrap two springs (1) around crosstube (7) and secure.
2-536