TM-9-2320-279-10-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

OPERATOR’S MANUAL VOLUME 2 OF 2

DECEMBER 1998
CHANGE 3

  TM-9-2320-279-10-2 - Page 88 of 819

TM 9-2320-279-10-2
M984E1 General Operating Procedures
Section VII. OPERATION UNDER USUAL CONDITIONS
2-58. DRIVE M984E1.
a. Drive M984E1 Forward.
NOTE
If vehicle has less than 500 miles (805 km), check
controls and indicators often during operation and
listen for unusual noises or vibrations. Notify
organizational maintenance of any problems.
Refer to TM 9-2320-279-10 Volume 1 for additional
operating instructions.
(1)
Remove and stow wheel chocks (1).
(2)
Before driving:
Make sure crane, outriggers, and outrigger pads are secured in
stowed position (para 2-63g).
Make sure heavy-duty winch cable clevis is retracted to
fairlead/tensioner (para 2-65c).
Make sure fairlead/tensioner is in stowed position (para 2-65c).
Make sure retrieval cylinders are fully retracted (para 2-72b).
Make sure equipment body doors are closed.
Make sure vise is returned to stowed position (para 2-68b).
Make sure all equipment in equipment body is securely stowed.
2-53


Back to Top