TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
(3)
(4)
(5)
Remove two screws (9) and lens (10) from
lampholder (11).
Remove lamp (12).
Remove two screws (13), lampholder (11),
and gasket (14) from bracket (15).
b. Installation.
NOTE
Cab, step, side, and rear clearance lights are
installed in the same manner.
(1)
Install gasket (1) and lampholder (2) on
bracket (3) with two screws (4).
(2)
Install lamp (5).
(3)
Install lens (6) on lampholder (2) with two
screws (7).
7-231