TM-9-2320-279-20-1

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 1 OF 3

TM-9-2320-279-20-1 - Page 833 of 985

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

7-72.1. FIXED WORKLAMPS REMOVAL/INSTALLATION (M984E1).

This task covers:

a. Removal

c. Follow-on Maintenance

b. Installation

INITIAL SETUP

Models

References

M984E1

None

Test Equipment

Equipment Condition

None

TM or Para

Condition Description

Special Tools

Para 7-91

Batteries disconnected.

None

Special Environmental Conditions

Supplies

None

None

General Safety Instructions

Personnel Required

None

MOS 63S, Heavy wheel vehicle mechanic

a. Removal.

NOTE

●

Left and right worklamps are

removed the same way.

●

Tag and mark wires before

removing.

(1)

Remove clip (1) and disconnect two.

connectors (2 and 3).

(2)

Remove two wires (4) from

connector (3).

NOT E

(3)

(4)

Mark bushing before removing.

Remove nut (5), washer (6), and

bushing (7) from screw (8).

Remove worklamp (9) and wires (4)

from bracket (10).

7-257