TM 9-2320-279-20-1
Electrical System Maintenance Instructions (Cont)
7-91. NEGATIVE BATTERY CABLES DISCONNECT/CONNECT (CONT).
NOTE
There are two types of batteries. Model A is identified by a 6TN printed on the side
of the battery, while Model B has a 6TL printed on the side of the battery.
Refer to the illustrations for Models A and B
battery caps of Model B
f
d
or proper positioning of batteries. The
o not protrude through the bracket.
If Models A and B are combined on the same vehicle, all batteries will be positioned
as shown for Model B.
(3)
Loosen two nuts (4).
(4)
Disconnect two negative cable terminals (5) from battery posts (6).
b. Connect.
WARNING
Batteries produce explosive gases. To
prevent injury to personnel, keep
sparks and flames away, and do not
smoke.
(1)
Connect two negative cable
terminals (1) to battery
posts (2).
(2)
Tighten two nuts (3).
7-334
Change 3