TM 9-2320-279-20-2
a. Removal.
(1)
(2)
(3)
Remove breather filler cap (1) from
retaining plate (2).
Remove six screws (3), lockwashers (4)
and breather filler cap (1) and retaining
plate (2) from reservoir (5).
Remove gasket (6).
(4)
(5)
Remove four nuts (7), screws (8), and
bracket (9) from top plate (10).
Remove nut (11), two lockwashers (12),
nut (13), and support rod (14) from
bracket (9).
(6)
Remove 32 locknuts (15), screws (16),
top plate (10), and gasket (17) from
reservoir (5).
Steering System Maintenance Instructions (Cont)
13-14.
HYDRAULIC RESERVOIR TOP PLATE AND SIGHT GLASS REMOVAL/INSTALLATION
(M984E1) (CONT).
13-53