TM-9-2320-279-20-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 2 OF 3

TM-9-2320-279-20-2 - Page 598 of 938

TM 9-2320-279-20-2

Cab and Body Maintenance instructions (Cont)

b. Cleaning/inspection.

WARNING

Drycleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles,

face shield, and gloves; use only in a well-ventilated area; avoid contact with skin,

eyes, and clothes, and do not breathe vapors. Keep away from heat or flame. Never

smoke when using solvent; the flashpoint for Type I Drycleaning Solvent is 100°F

(38°C) and for Type II is 140°F (60°C). Failure to do so may result in injury or

death to personnel.

If personnel become dizzy while using cleaning solvent, immediately get fresh air

and medical help. If solvent contacts skin or clothes, flush with cold water. If solvent

contacts eyes, immediately flush eyes with water and get immediate medical

attention.

(1)

Clean metal surfaces with drycleaning solvent.

(2)

Check for cracked or broken parts and frayed or torn webbing.

(3)

Replace all damaged parts.

c.

Installation.

NOTE

Procedure is identical for both seats. Left seat is shown.

(1)

Position D-ring (1) in cab assembly (2) with two hardened washers (3), comfort latch (4),

spacer (5), washer (6), locknut (7), and screw (8).

(2)

Tighten locknut (7) to 70 to 75 lb-in (8 N•m).

(3)

Install retractor unit (9) to cab assembly (2) with washer (10), screw (11), L-bracket (12) and

locknut (13).

(4)

Tighten locknut (13) to 70 to 75 lb-in (8 N•m).

Change 2

16-130.9