TM 9-2320-279-20-2
Axle Maintenance Instructions (Cont)
10-5.
AXLE SHAFT REMOVAL/INSTALLATION, NO. 3 AND NO. 4 AXLES (CONT).
NOTE
Model A contains an axle shaft gasket, and
model B does not.
(2)
Remove axle shaft (4) and gasket (5).
b. Installation
NOTE
Model B uses RTV sealant instead of
gasket to seal axle shaft.
(1)
Install gasket (1) and axle shaft (2).
(2)
Install eight dowels (3),
lockwashers (4), and nuts (5).
(3)
Follow torque sequence and
tighten eight nuts (5) to 40 lb-ft
(54.24 N•m).
(4)
Follow torque sequence and
tighten eight nuts (5) to 145 to
155 lb-ft (197 to 210 N•m).
c. Follow-on Maintenance.
Check axle
oil. Fill axle with oil (LO 9-2320-279-12).
END OF TASK
10-8