TM-9-2320-279-20-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 2 OF 3

TM-9-2320-279-20-2 - Page 733 of 938

Cab and Body Maintenance

NOTE

●

All latches are installed the same way.

Bend tabs on tab washer against sides of

nut.

(5) Install handle (8) and shaft (9) in

door (2) with stop washer (10),

plate (11), spring washer (12), tab

washer (13), nut (14), pawl (15), and

screw (16).

NOTE

Do not install rear bracket in upper and

lower box.

(6) Install bracket (17) in lower box (18)

with two screws (19) and nuts (20).

NOTE

When installing locknut on rod, tighten

locknut until the distance between collar

on rod and locknut measures

approximately 7.25 in. (185 mm).

All lower doors are installed the same

way.

Upper doors are welded. Refer to

TM 9-237 for welding instructions.

(7) Install spring (21) on rod (22) through

bracket (17) with locknut (23).

(8) Install rod (22) on door (2) with

washer (24) and cotter pin (25).

Instructions (Cont)

TM 9-2320-279-20-2

16-232