TM-9-2320-279-20-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 2 OF 3

TM-9-2320-279-20-2 - Page 797 of 938

TM 9-2320-279-20-2

Winches, Cranes, and Power Takeoff (PTO) Maintenance Instructions (Cont)

17-10. SELF-RECOVERY WINCH AND BRACKETS REMOVAL/INSTALLATION (CONT).

a. Removal.

(1)

(2)

(3)

(4)

Remove two nuts (1),

lockwashers (2),

washers (3), and screws

from winch mounting

bracket (5).

Move two hoses (6) and

bracket (7) aside.

Support self-recovery

winch (8) with suitable

lifting device.

Soldier A removes four

screws (9) while Soldier

holds and removes four

nuts (10).

NOTE

ON M984E1, the eight screws

are installed so that the nut is

(4)

B

on the outside of frame. These

screws do not need to be

removed unless replacement is

necessary.

(5)

Soldier A removes eight

screws (11) while Soldier B

holds and removes eight

nuts (12).

NOTE

Do step

(6)

for M984 and M983

(without crane) only.

(6)

Soldier A and Soldier B

remove self-recovery

winch (8) and two

brackets (13).

NOTE

Do step

(7)

for models M977,

M978, M983 (with crane),

M984E1, and M985.

(7)

Soldier A and Soldier B remove self-recovery winch (8).

17-54