TM-9-2320-279-20-2
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 2 OF 3
TM-9-2320-279-20-2 - Page 83 of 938
TM 9-2320-279-20-2
Brake and Air System Maintenance Instructions (Cont)
11-5.1
FRONT BRAKE CAMSHAFT AND AUTOMATIC SLACK ADJUSTER
REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Adjustment
b. Installation
d. Follow-on Maintenance
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
Supplies
Compound, antiseize, Item 10, Appendix C
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10
Shut off engine.
Para 12-2
Hub and drum assembly
removed.
Special Environmental Conditions
None
General Safety Instructions
Wheels chocked.
Level of Maintenance
General Support
a.
Removal.
NOTE
Left and right camshafts and automatic
slack adjusters are removed the same way.
Right side is shown.
(1)
Pry brakeshoes (1) away from
camshaft (2) and remove cam roller
pins (3) and cam rollers (4).
(2)
Remove cotter pin (5) and clevis pin (6)
from slack adjuster (7) and brake
chamber yoke (8).
Change 2
11-12.1
Back to Top
