TM-9-2320-279-20-2

M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; ORGANIZATIONAL MAINTENANCE, VOLUME 2 OF 3

TM-9-2320-279-20-2 - Page 896 of 938

TM 9-2320-27420-2

Winches, Cranes, and Power Takeoff (PTO) Maintenance instructions (Cont)

NOTE

Some models electrical leads are connected by electrical plug and some are connected by

electrical terminals, lockwashers, and screws. If connected by electrical plug, perform

step

(16).

If connected by terminals, lockwashers, and screws, perform step

(16.1).

(16)

Connect connector (18).

(16.1)

Connect two wires (23) with screws (24) and lockwashers (25).

(17)

Connect three hoses (19, 20, and 21).

(18)

Fill PTO shaft spline cavity (22) with grease.

c.

Follow-on Maintenance.

(1)

Install hydraulic pump (para 17-28.1).

(2)

Fill hydraulic reservoir (LO 9-2320-279-12).

(3)

Check operation of power takeoff (TM 9-2320-279-10).

END OF TASK

Change 2

17-145