TM-9-2320-279-24P-1
M977 SERIES, 8x8 HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST, VOLUME 1 OF 2
TM-9-2320-279-24P-1 - Page 17 of 1297
TM 9-2320-279-24P-1
Recoverability
Code
Application/Explanation
Z
-Nonreparable item.
When unserviceable, condemn and dispose of the item at the level of maintenance shown
in 3rd position of SMR Code.
O
-Reparable item.
When uneconomically reparable, condemn and dispose of the item at organizational level.
F
-Reparable item.
When uneconomically reparable, condemn and dispose of the item at the direct support level.
H
-Reparable item.
When uneconomically reparable, condemn and dispose of the item at the general support
level.
D
-Reparable item.
When beyond lower level repair capability, return to depot.
Condemnation and disposal of
item not authorized below depot level.
L
-Reparable item.
Condemnation and disposal not authorized below specialized repair activity (SRA).
A
-Item requires special handling or condemnation procedures because of specific reasons (e.g., precious metal
content, high dollar value, critical material or hazardous material).
Refer to appropriate manuals/directives for
specific instructions.
c.
CAGEC (Column (3)).
The Commercial and Government Entity Code (CAGE) is a 5-digit numeric code which is
used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
d.
PART NUMBER (Column (4)).
Indicates the primary number used by the manufacturer (individual, company,
firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications standards, and inspection requirements to identify an item or range of items.
NOTE
When you use a NSN to requisition an item, the item you receive may have a different part
number from the part ordered.
e.
DESCRIPTION AND USABLE ON CODE (UOC) (Column (5)).
This column includes the following information:
(1)
The Federal item name and, when required, a minimum description to identify the item.
(2)
Spare/repair parts that make up an assembled item are listed immediately following the assembled item line
entry.
(3)
Part numbers for bulk materials are referenced in this column in the line item entry for the item to be
manufactured/fabricated.
(4)
The usable on code, when applicable (see paragraph 5, Special information).
(5)
In the Special Tools List section, the basis of issue (BOI) appears as the last line(s) in the entry for each
special tool, special TMDE, and other special support equipment.
When density of equipments supported exceeds density
spread indicated in the basis of issue, the total authorization is increased proportionately.
(6)
The statement "END OF FIGURE" appears just below the last item description in Column 5 for a given figure
in both Section II and Section III.
f.
QTY (Column (6)).
The QTY (quantity per figure column) indicates the quantity of the item used in the breakout
shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an assembly.
A '"V'
appearing in this column in lieu of a quantity indicates that the quantity is variable and the quantity may vary from
application to application.
4
Back to Top
